Three Greatest Moments In Window Repair History

Window Repairs

Window repairs can save homeowners money and help keep their homes warm. Window replacements may be required in the event of severe damage like broken glass or a window frame that has been smashed.

However, many other issues can be fixed to prolong the life of your windows. The most frequent issues are:

Broken or cracked panes

Cracked windows could be caused by a lawnmower that throws rocks in the wrong direction or the blow of a tree branch by strong winds. It's not just visually terrible, but it could also lead to higher energy bills as broken glass lets cold air into your house. Luckily, it's usually relatively simple to repair windows with damaged panes.

Start by carefully removing the glass using gloves and glasses. You may need to use a utility knife to break loose the old glazing compound or putty around the frame's edges. Then, clean the glass's surface and the wood of the frame using a soft cloth or paper towel.

Once the frame is clean, apply a waterproof silicone caulking around the perimeter of the frame. This helps prevent water from entering through the crack, which can cause further damage to both the frame and the glass.

A crack that is severe in double glazing repairs-paned glass may affect the gas between the panes, making your windows less insulative. If the crack is severe enough to threaten the quality of the glass or the glass has an inner pane completely missing, it might be time to contact an expert.

Cracks in thermal stress can occur when there's an extreme difference in temperatures between the outside and inside of your home, causing the glass to expand or contract. If this happens to two parts of a window it's best to simply replace the pane instead of attempting to repair it.

For windows that have cracked but aren't quite ready to be replaced clear tape can do a great job of stabilizing the crack and keeping out bugs and cold air. You can even cut an area of nylon stocking or tarp large enough to cover the crack, and glue it in place with duct tape. It's not a permanent solution, but it's a good way to keep insects out and cold air away from your home. If you notice cracks on your older windows You should consult the local company to determine if replacing the whole window is a better option.

Rotten Wood

Wood rot is one of the most frequent problems that plague windows. It can damage a home's appearance and pose a safety risk. However, Window Repairs it is possible to fix rotted wood. First, you must address the cause of the wood's decay. This can be accomplished by looking for leaks in the roof or gutters that are not functioning cracking caulking, and any other areas which allow water to penetrate the wood.

The next step is to remove any rotten areas of the window frame. This can be accomplished with an axe, a claw hammer or a rasp. After removing the decayed wood, you'll have to replace it with new wood. It is recommended that you use pre-treated wood for this task as it is resistant to rot. If you are unable to replace the rotted timber you can apply filler and wood hardener to repair the damaged area. This type of product will be available at a majority of hardware stores. Follow the directions on the label of the product to achieve the most efficient results.

After you have replaced the rotten areas of the windowsill, it is important to protect the repaired area. Apply a water-resistant sealant to the wood. A product like Sikkens is an excellent option for this job.

It is also possible to use an epoxy filler that is two-part to protect the wood from further damage. This product is easy-to-apply and leaves a nice finish. However, it is very important that you follow the application instructions on the label. After the epoxy filler dries you can sand the surface of the wooden. Start with a rough sandpaper and then move on to an easier grade.

You do not want to expose the damaged area to more moisture. Therefore, it is an ideal idea to cover the area that has been repaired with an oil-based primer which will protect it from moisture. After that, you can apply the wood sealant, which is waterproof.

Won't Open

There are a variety of reasons windows won't open. Wood frames can warp during rainy weather, or the house could have settled or someone could have closed it for security reasons. With a little patience and the right tools you can open the majority of stuck windows.

The accumulation of gunk or debris can be a major reason of windows that aren't opening. Acme Glass notes that dirt and grime accumulates over time on hinges, sliding tracks and locks. Metal hardware may also rust if it comes in contact with humidity and direct sunlight. Spraying grease on these areas will aid in preventing oxidation and keep your windows functioning well.

The pulleys used to raise or lower the window may become loose, or even break. These parts can lose their tension and get blocked especially if the window is located at least two stories above the ground.

If you're having trouble opening the window, try using a pry bar to gently force the window open a little at a time. Put a block in the frame of the window to give the pry bar more leverage. Be careful not to harm the wood or the window. Alternatively, try running a hair dryer along the edges of the frame for several minutes to warm the wood and allow it move more easily.

A damaged spring can be the cause of a window that won't lift or lower. You'll need to refer to the owner's manual for additional details based on the manufacturer of your windows.

If you've tried cleaning and lubricating the moving parts on your windows, but they still aren't opening, it's time to replace windows. Homespire Windows & Doors offers energy-efficient replacement windows. Don't let windows in your home become functional to unusable. If your windows aren't properly closed could make your home vulnerable to water damage and burglary. Contact us to learn more about our windows replacement and services today!