Repairs To Upvc Windows It s Not As Expensive As You Think

Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are durable, long-lasting and easy to maintain. They don't rot or rust like timber and aluminum.

It is essential to clean and oil UPVC doors and Window Repairs windows on a regular basis. This will prevent unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause severe damage to your home, and could even be fatal. It is important to ensure that your windows are in good working order.

Single-pane windows are fairly simple to replace, and they will usually fit into the old frames very easily. However when windows with double panes are held in place by internal beading, it'll be more difficult to remove the panes that are in place and replace them with new ones. In this instance, you will need to locate some plastic spacers to help the new pane to fit properly into the frame of the window.

Wearing eye protection and heavy gloves is essential when you are planning to remove the glass yourself. You should also lay down a drop cloth before you begin working on the window panes to ensure that any shards of glass fall onto the fabric, not onto the floor and could be trampled under.

It's a great idea to cover the gap with tape after the glass is removed. This will prevent water and drafts from entering your property until a professional is able to repair the window. This will also act as a barrier, deterring any intruders to gain access to your home. If the gap between the window and the door is large, you might need to consider an alarm system that has an opening. This will give you the best of both.

2. Sagging

Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash window. However, with time, they are susceptible to a range of issues, including sagging. A sagging uPVC windows can cause problems with light, draughts and even security. It is crucial to act when you discover that your uPVC windows are sliding.

Repositioning the hinges can help fix a window that is sliding. First, you'll need to open the windows to access the frame. Then, you can remove the top and bottom hinges with a screwdriver and adjust them clockwise or counter-clockwise. Close your window to check the fit after having repositioned your hinges. If you're happy with the fit, tighten the screws to ensure that they remain in the right place.

If you cannot reposition the hinges, you may need to replace the seal. Rubber seals may dry out and lose their elasticity with time, leading them to loosen. If this happens, it's crucial to replace the seal as soon as possible so that your uPVC windows remain watertight and draught-proof.

uPVC handles may also loosen. The majority of the time, this is caused by screws that have come loose over time. However, it could also happen because the handle mechanism has worn out. It's relatively simple to repair a loose uPVC handle. You'll first need to close the window and perform a test fitting. The joint at the corners of the sash should be aligned with the joint on the casing. If it isn't you can use a screwdriver to loosen up the handle. Then, turn the mechanism back into place.

3. Water Leaks

It is crucial to take action if get up each morning to find mouldy walls and wet floors. Water leaks from windows not only lead to the degradation of your home's structure but also hinder your efforts to control the temperature inside your home. The most common cause for leaks in uPVC windows is that the sealant around the frame is either damaged or not present.

This is a simple fix that can be completed by any DIYer who is competent. Depending on the severity of the problem the caulking used previously might need to be removed before a new layer can be applied. It is important to keep in mind that when it comes to uPVC window repairs, do avoid the temptation to "over-caulk' as this will only make the area harder to clean and can decrease the efficiency of your energy usage.

Make sure that the drainage holes do not have debris inside them and ensure that the sill pan is properly angled to allow the water to drain from the window. In more serious situations, you might have to consider replacing the window repairs.

Other indicators of long-term water leakage include sills that are rotten and the appearance of black spots of mold on the walls near the window. The mold thrives in damp environments and can quickly spread across the house.

It is also important to note that if the leakage originates from the glass of your double glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sagging. A uPVC specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and open with ease it could be the hinges that are at fault. They can be easily repaired by any DIYer who is skilled and can be completed in just a few minutes.

Almost every household in the UK will have either top hung or side-hung uPVC windows that have hinges and, like all mechanical parts, they will wear out over time. Changing a window hinge is essentially a simple process but it can be easier to do with someone else to assist in holding the frame in place.

Check that the uPVC hinges are closed and open in the correct direction. Check for the arrows on each hinge to determine which way the window should be opened.

The problem can be caused either by opening the window incorrectly or by a poor installation at the factory. Sending us photos via our website is often enough to solve the issue. We are more than happy to offer assistance.

It is also essential to lubricate the hinges regularly. Applying a light engineering lubricant to the hinges is an ideal method to accomplish this. We suggest using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to operate and close more smoothly. It can also lower the chance of windows sticking and help prevent corrosion. It is recommended to do this once a year. WD40 or other solvent-based oils are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by a few different things. The hinges may also become misaligned due to wear, creating an opening where the sash and frame meet. These can be easily repaired by giving them a thorough clean, however when they're beyond repair, it could be necessary to have them re-aligned or replaced. Secondly the interlock, this is located on the hinge side of the window and can also be misaligned, and again it's possible to give them a thorough clean, however in some cases it might be necessary to get them replaced.

These seals can wear down or become damaged over time, allowing air to escape. Installing high-quality weatherstripping will help to stop draughts. Another alternative is to replace the upvc window with low-emissivity glass. this will help in regulating indoor temperatures, and also lessen the risk of draughts.

The final method to cut down on draughts effectively is by using a Draught-exclusion device. These are usually made of fabric tubes filled with a filler, which can be put on top of your window sill. They can help block out cold air and keep your home warm and cosy!

Your upvc windows can remain a great source of insulation and security for your home by performing regular maintenance and repairs. However, it is important to recognise that windows last for a certain period of time and eventually, they will reach an point at which it is more cost-effective to replace them rather than repair them. So, if you are having issues with your upvc windows, it is always recommended to seek assistance from a professional as soon as you can.