5 Common Myths About Repairs To Upvc Windows You Should Avoid

Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are easy to maintain, durable and long-lasting. They don't decay or rust as aluminum and timber.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will reduce repair costs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows can cause serious damage to your home and may even be fatal. It is crucial to take the time to make sure that you're doing everything you can to keep your windows in good shape.

For single pane windows it is relatively easy to replace them, and the new window will generally fit within the frame that was previously installed easily. If you have double-paned windows that are held together by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this instance it is essential to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

Wearing eye protection and thick gloves is essential if you plan to remove the glass yourself. It is also recommended to lay down a drop cloth prior to when you begin working on the glass so that any shards will fall onto the fabric rather than on the floor, uPVC window repairs where they could be trampled upon and cause further damage.

Once the glass has been removed, it's a good idea to seal the gap with packaging tape or duct tape to prevent water and drafts from getting into the home until a professional can come out and fix the window. It also acts as a barrier that will prevent any intruders to gain access to your home. If the gap is large, you might think about an alarm door that comes with an integrated window, since it will provide the best of both worlds.

2. Sagging

uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash window. However, with time, they may be afflicted by a variety of problems including sagging. A sagging uPVC windows can cause issues with light, draughts, and even security. If you notice that your uPVC window is beginning to sag it is important to act swiftly to stop the issue from worsening.

To fix a sagging window you can try to reposition the hinges. To do this, you'll need to open the window so that you can get to the frame. Then, remove both the hinges on the top and bottom using a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to test the fit after you have relocated your hinges. If you are happy with the size of the window, tighten the screws to hold them in the right position.

If you can't reposition the hinges, you might require replacing the seal. Rubber seals may dry out and lose their elasticity with time, causing them to loosen. It is important to replace your seal as soon as you can in order to ensure that your uPVC window watertight and draughtproof.

uPVC handles may also become loose. This is typically caused by screws that have been removed over time, but it could also be caused by the handle mechanism wears out. It's fairly simple to fix a loose uPVC hand. First, you'll need to close your window and do a test fit. The corners of the sash need to align with the casing joint. If it doesn't, you can use the screwdriver to loosen the handle. Then turn the mechanism to position.

3. Water Leaks

If you're waking up to wet floors and damp walls each time it rains, it's important to take action. Water leaks through windows can cause structural damage to your home and also affect your ability to regulate the temperature of your home. The most common cause for leaking upvc window repairs (http://xilubbs.xclub.tw/) windows is that the sealant surrounding the frame has been damaged or missing.

It is a fairly easy fix that can be done by any competent DIYer. Based on the severity of the problem the caulking used previously may require removal before a new layer of caulk can be put on. When it is time to uPVC repair, you should avoid 'over-caulking'. This will make your window harder to clean and lower its energy efficiency.

Check that any drainage holes have no debris inside them and that the sill pan is properly angled to drain away from the window. In more serious situations, you might need to consider replacing the window.

Other signs of long-term water leakage include decayed sills and the appearance of black spots of mold on the walls near the window. This mold thrives in damp environments and is able to quickly spread throughout the home.

If the leakage occurs between the double-glazed window, it is more likely that the issue is more with the seal than the frame. This can be easily repaired by a uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and open with ease it could be the hinges that are at the fault. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Almost every household in the UK will have top-hung or side-hung uPVC windows that are hinged and like any mechanical part they are susceptible to wear and tear over time. It is very easy to change a window hinge but it's much easier if someone else helps you to hold the frame.

Check that the uPVC hinges are closed and open in the right direction. Look for the arrows on each hinge to determine which way the window should be opened.

Faulty window hinges could be caused by improperly opening the window in a certain way or by improper installation in the factory. This can often be resolved by sending us a picture on our website. We will be pleased to offer you suggestions.

It is also important to ensure that the hinges are lubricated regularly. This can be done by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window operate and close more easily. It can also prevent corrosion and decrease the chance of sticking. This should be done at least every year. WD40 and other solvent-based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by different things. Firstly the hinges, again because of wear and tear, can become misaligned, this will cause gaps to develop where the sash joins the frame. If they are beyond repair, it could be necessary to get them re-aligned. The interlock, which is located on the hinge side of the window and can also become misaligned, again it may be possible to just give them a good clean, but in some instances it could be necessary to have them replaced.

The next common reason for draughts are the window doctor seals. They are susceptible to being worn out or damaged over time, and will allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity lenses. This will help control indoor temperatures, and reduce the possibility of draughts.

The last way to reduce drafts effectively is to use a Draught-excluder. These are typically fabric tubes filled with a filler, which can be hung over your window sill. They can keep your home warm by blocking out cold air.

With a little regular maintenance and repair your windows made of upvc will provide an excellent level of insulation and security for your home. It is essential to remember that all windows eventually get worn out and it is cheaper to replace them than to repair them. If you are experiencing issues with your upvc window, it's best to consult an expert immediately.