12 Companies Leading The Way In Window Repair
Window Repairs
Window repairs can help homeowners save money and ensure their comfort. Window replacement may be necessary in the event of serious damage such as broken glass, or a window frame that has been smashed.
Many other issues can be fixed to extend the life of windows. Common issues include:
Cracked or Broken Panes
If it's an unintentional rock thrown by your lawnmower or a tree branch that has been blown by high winds, damaged window glass is not only visually unappealing, but also can result in higher electric bills since the broken pieces allow cold air to enter your home. It's fairly simple to repair windows with broken panes.
Start by carefully removing the glass with gloves and safety glasses. You may have to use a utility knife to loosen any remaining putty or glazing compound that has accumulated around the edges of the frame. Then, use a soft paper towel or cloth to clean the surface of both the glass and the wood of the frame.
Once the frame is clean, apply a waterproof silicone caulking to the perimeter of the frame. This will prevent water from getting into the frame through the cracks and result in further damage.
If you have double-pane glass cracks that are severe could damage the gas layer between the panes and make your windows less insulative. If the crack is severe enough to cause damage to the integrity of the glass or the glass has an inner pane completely missing, it's time to call in a professional.
Cracks caused by thermal stress can occur when there is a drastic difference in temperature both inside and outside your home. The glass is then able to expand and shrink. If this happens on two parts of a window, it's probably best to simply replace the pane instead of attempting to door repair it.
If your windows are cracked and not quite ready to be replaced Clear tape can do a good job of securing the crack and keeping out bugs and cold air. You can also cut the length of a nylon stocking to completely cover the crack and then glue it to the surface with duct tape. This isn't a permanent solution, but it's a good way to keep insects and cold air away from your home. If you notice cracks appearing on your older windows it is recommended to contact your local business to determine whether replacing the entire window is a better solution.
Rotten Wood
Wood rot is a common issue with windows. It can ruin a house's appearance and create a security risk. However, it is possible to fix rotted wood. First, you must identify the cause of the wood's decay. This can be done by checking for leaks in the roof, missing gutters or replacement cracked caulking, as well as other areas that allow water to enter the wood.
The next step is to take off the rotten parts of the window frame. This can be done with either a chisel, a rasp or claw hammer. After you have removed the decayed wood, you'll need replace it with new wood. Pre-treated wood is recommended for this project, as it will resist rot. If you cannot replace the timber that has rotted then you can use filler and wood hardener to reinforce the damaged area. Many hardware stores will sell this kind of product. To get the best results, follow the instructions on the product label.
After you have repaired the damaged areas of the window sill, it's important that you protect the area. Apply a water-resistant sealant on the wood. Sikkens, for example is a great one to apply.
Use a two-part epoxy in order to protect the wood from further damage. This product is easy-to-apply and leaves a nice finish. However, it is very important that you follow the directions for application on the label. After the epoxy filler is dry, you can rub the surface of the wood. Start with a rough sandpaper, then move on to an easier grade.
You do not want to expose the damaged part to further moisture. It is a good idea that's why you should protect the surface you have repaired with an oil-based prime which will shield it from moisture. After that, you can apply the waterproof wood sealant.
The W won't let you open
There are a variety of reasons windows don't open. The house may have settled, or the wood frames could have warped during humid weather. There is also the possibility that someone secured them with a nail for security. With a little patience and the right tools you can open the majority of stuck windows.
One of the main causes of windows that isn't able to open is the accumulation of debris or gunk on its moving parts. Grime and dirt build up on the sliding tracks, hinges, and locks over time, according to Acme Glass. Additionally, hardware made of metal may get rusty when in contact with humidity and direct sunlight. Spray grease on these areas to aid in preventing oxidation and keep your windows functioning properly.
The pulleys used to raise or lower the window could become loose, or break. These parts can lose tension and become obstructed if they are located two or more floors above ground.
If you're having difficulty opening a window, try using a pry bar to gently force the window open a little at one time. Put a block on the frame of the window to give the pry bar more leverage. Be careful not to damage either the wood or the window. Try using a hairdryer to dry the frame's edges for a few minutes. This will warm the wood, making it easier to move.
A faulty spring can also be the reason for windows that don't raise or lower. You'll need to refer to the owner's manual for more details depending on the person who made your windows.
If you've tried cleaning and lubricating the moving parts on your windows, but they aren't opening, it may be time to replace the windows. Homespire Windows & Doors offers windows that are energy efficient. Don't let the windows of your home become functional to inoperable. If a window isn't properly shut can make your home vulnerable to water damage and burglary. Contact our team today to learn more about our replacement windows and our services!
