10 Saab 9-3 Key Replacement That Are Unexpected

How to Replace the Replacement Key Battery For the Saab 9-3

Saab key programmer, https://telegra.ph/, owners have a unique set of steps to add a second key. This requires the use of a handheld computer called Tech-2 which is used by the dealer. Then the transponder is replaced and a key are required to be purchased.

It is an excellent idea to rotate your keys in order that one does not get worn out more quickly than the other. This will help to keep your keys in pristine condition.

Replacement Case

The new key fobs are not like the older Saab keys. They're equipped with electronic devices that make them difficult to duplicate. This has made theft of cars significantly more difficult than it was a few years ago. It also makes it more expensive to replace lost saab key keys.

Saab 9-3 owners must have two keys working. It is expensive to replace a lost or damaged key since it requires replacing the CIM module, as well as reprogramming the locking cylinders. Dealers charge between $100-$200 for this.

There are ways to avoid these high costs. Certain parts suppliers will utilize the code of an extra key to cut a brand new metal blade for less than what the dealer charges. The key must be exactly the same as the original to allow it to function in your vehicle.

Follow these steps to replace the case. You'll need a flathead screwdriver as well as some patience. With the screwdriver, [Redirect-301] slowly pry the plastic apart and remove the emergency key from the case. Once the case is open, take the electronics out and place them inside the new case. Put the correct key and badge into the case.

Replacement Battery

The Saab 9-3 replacement battery is an inexpensive component that can be easily and quickly replaced. This YouTube tutorial for DIY user Cyclone Cyd explains how to replace the battery of the remote key fob in only four steps. This tutorial can be used with any modern Saab key fob. However, the process may differ slightly.

This button is usually located just below the Saab logo on the back of the fob. This button is usually located near the Saab logo on the back of the fob. Next take a flathead screwdriver to insert into the small hole in this button. This should be enough to allow you to open the fob case so that you can replace the battery.

After the new battery CR1632 is in place You can then reassemble the remote key fob, and then program it to your car. The entire process should take no more than an hour, if not less. It is a very simple procedure that doesn't require any special tools.

The process is more complicated if you lose your key, but it's possible. The dealer will need to read the car's VIN and then order a replacement key blade and TWICE module, both with the exact unique code. The dealer will then need to program the key using MDI, a brand new software tool.

Replacement Key Fob

The key fob is the device that locks and unlocks your car. It has a battery inside. The batteries have a lifespan that is a long time, and they eventually die. This is a problem that occurs that affects all cars. The good news is that you can replace the battery in all key fobs, without having to replace the entire case. Amazon sells fobs for replacement that already have all the electronic components installed. It is easy to pop the case open and replace the batteries. It's important to note that you will need to take out the emergency key first, and you can do this by putting the small screwdriver flathead into the slot located in the middle of the case. Move the screwdriver around the case until it will split open, making it simple to remove.

If you're about to replace the keys ensure that you have a spare, as this will reduce your total cost by a substantial amount. If you have a spare you can request that the dealer cut an entirely new key and then program it to the car, which is much cheaper than replacing the whole key fob.

If you don't have a spare car key, you can add an additional key to your car, however it requires a lot of research and effort. It costs a few hundred dollars to add an additional car key. The computer in the vehicle must also be programmed. Professionals can accomplish this, but it's an expensive option.

Replacement Ignition

As opposed to earlier Saab automobiles, the new SAAB 9-3 models are equipped with an upgraded alarm system that is built on a key code. This means that if you lose your only working key, acquiring another one could be very expensive because the car needs to have a specific computer module added and it also must be specially programmed to accept an extra key. Locksmiths typically aren't able to program this and even a dealer will charge several hundred dollars to program the new key!

If you've lost your sole working key and a dealer is able to replace the computer in your car (known as the CIM or SAAB TWICE) to create a replacement, and will charge you a premium price for it. Instead we can reprogram the EEPROM on your existing car computer, preparing it to accept a second key, which will save you more than 50% of what you'd pay at a dealership.

If you've been a faithful owner of a 03-11 saab replacement keys 9-3, you probably have noticed that the ignition switch isn't really all that robust. If the ignition key you have isn't working properly, you should consider replacing it. They can become sticky and the buttons can fall off. The good news is that replacing the ignition key isn't as difficult as it sounds, and it can be done in a short time with the appropriate tools.