"A Guide To Saab 9-3 Key Replacement In 2023

How to Replace the Replacement Key Battery For the Saab Key Programming 9-3

Saab owners have to follow a series of specific steps to add an additional ignition key. It requires dealer service with an electronic handheld computer called Tech-2. Then a new key and transponder have to be purchased and then programmed into the car.

Change your keys regularly to prevent one from wearing out quicker than another. This will also ensure that your keys remain in pristine condition.

Replacement Case

Contrary to the classic Saab keys of old, the new key fobs are equipped with electronics that make it difficult to create a duplicate. This has made car theft much more difficult than twenty years ago. However, it has made replacing lost keys a much more costly endeavor.

Every owner of a Saab 9-3 should have at a minimum two functioning keys. If one gets lost, it costs a lot of money to replace it in the car, as it requires replacing the CIM module and programming the locking cylinders. Dealers charge between $100-$200 for this.

There are several ways to get around the high price. Some parts retailers will find the code on an extra key (usually the same one that opens the doors and turns on the ignition) and cut a new key blade out of metal for less than the dealer's cost. The key must be exactly the same as the original in order for it to work in your vehicle.

Follow these steps to replace the case. You will need a flathead screwdriver along with some patience. With the screwdriver slowly pull the plastic apart and then separate the emergency key from the case. Once you have the case open, take the electronics out and put them in the new case. Be sure to put the correct badge and key back into the case, as well.

Replacement Battery

The replacement battery for the Saab 9-3 is a cheap part that can be replaced quickly and easily. This YouTube video by Cyclone Cyd demonstrates how to open a saab 93 without a key you can replace the remote fob battery with just four simple steps. This tutorial is suitable for any modern saab key fob, however, the procedure may differ slightly.

The button is normally located just below the Saab logo on the back of the fob. It's usually just below the Saab logo on the back of the fob. Use a flathead to insert the screwdriver into the tiny hole in this button. This should be enough to open the case in order to change the battery.

Once you have installed the new battery CR1632, you are able to reassemble the remote key fob. Then, you can program it into your car. The entire process shouldn't take more than an hour. It's a simple process that does not require any special equipment.

The process is more complex if you lose your key, Saab key programming but it's possible. The dealer has to first verify the VIN of the vehicle, and then purchase an additional TWICE module and key blade that is matched to the unique code. The dealer will then need to program the key using MDI an innovative software tool.

Key Replacement Fob

The key fob is the part that locks and unlocks your car, it has an internal battery. Batteries have a limited lifespan and will eventually fail. This is a problem that occurs that affects all cars. The good news is you can replace the battery on most key fobs, without having to replace the entire case. Amazon sells replacement fobs with all the electronics installed. It is easy to pop the case open and replace the batteries. It is important to keep in mind that you'll need to take out the emergency key first. you can accomplish this by inserting a small flathead screwdriver into the slot found in the middle of the case. Move the screwdriver around the case, and it should split open, making it much easier to take it out.

If you are about to replace your keys, ensure you have a spare because this can cut down the total cost by a substantial amount. If you have an additional key, request the dealer to cut it and program it for your vehicle. This is a lot less expensive than purchasing a new key fob.

It is possible to add another key to your car If you don't already have one, but it will require some research and work. It costs around a hundred dollars to purchase an additional car key. The computer in the vehicle also has to be programmed. Professionals can do this, but it's an expensive option.

Replacement Ignition

Contrary to the earlier Saab automobiles, the current SAAB 9-3 models feature an upgraded alarm system that is built around a coded key. If you lose only one key, it could be expensive to add another one since the car must be equipped with a specific computer and also be programmed to accept a brand new key. Even a dealer can charge hundreds of dollars to program an additional key in the event that they are unable to complete the task.

Dealers will charge you the highest price to replace your car's computer (also known as the CIM or SAAB twice) if you lose your sole working key. Instead we can reprogramme the EEPROM in your current car computer to make it ready for a replacement key, saving you over 50% of the amount you spend at a dealer.

If you have owned a SAAB 9-3 many years you are aware that the ignition keys are not very durable. They can be extremely sticky and the buttons are known to fall off from time to time It is recommended that you consider buying a new one if the one you have isn't working as it should. It's good to know that replacing the ignition key isn't as complicated as it sounds, and it is fairly easy to do with the proper tools.