What Experts In The Field Would Like You To Know

How to Replace the Replacement Key Battery For the Saab 9-3

Saab owners have a distinct set of steps to add a second key. This requires an electronic handheld computer, referred to as Tech-2 which is to be used by the dealer. Then the transponder is replaced and a key must be purchased.

It is a good idea to rotate your keys so that one does not wear out faster than the other. This will also ensure that your keys remain in top condition.

Replacement Case

Unlike the classic saab 9-3 key fob replacement keys of the past, the new keys have electronic components which makes it difficult to duplicate. This has made theft of cars much more difficult than it was a few years ago. However, it has also made replacing lost keys a comparatively expensive task.

Every owner of a 9-3 saab key programming should have at least two working keys. It is costly to replace a lost key, as it requires replacing the CIM module, and changing the locking cylinders. Dealers usually charge between $100-$200 to do this.

There are several ways to get around these high cost. Some parts suppliers will use the code of an extra key to cut a new metal blade at a fraction that of a dealer. The key must be the exact same as the original for it to function in your vehicle.

Follow these steps to replace the case. You will need to have a flathead and patience. With the screwdriver, you can pry away the plastic and take out the emergency key. Once the case is open, remove the electronics and put them in your new case. Place the key with the correct badge into the case.

Replacement Battery

The replacement battery for the Saab 9-3 is a low-cost part that can be replaced easily and quickly. The YouTube video of Cyclone Cyd demonstrates how to replace the battery for the remote fob in just four steps. This tutorial should work for any modern saab-type key fob, although the process might differ slightly.

This button is usually located close to the Saab logo on the back of the fob. This is usually located near the Saab logo on the back of the fob. Use a flathead to insert the screwdriver into the tiny hole on this button. This should be enough to let the fob case open so that you can replace the battery.

Once the new CR1632 battery is installed, you can reassemble the remote key fob and program it to your car. The entire process should not take more than an hour, if not less. It's a simple procedure that doesn't require special tools.

If you lose a key, the process is more complicated, but it can still be accomplished. The dealer has to find the VIN number of the car and then order a new key blade and TWICE module, both with the correct unique code. After that, they'll need to cut the replacement key and then program it using the latest software tool known as MDI.

replacement saab 9-3 key Key Fob

The key fob is the device that locks and unlocks your car. It has an internal battery. The batteries last for a certain time and eventually fail. This is a frequent issue for all vehicles. The good news is you can replace the battery on most key fobs, and not have to replace the entire case. You can buy replacement fobs from Amazon that come with all the electronics already installed, so you'll be able to just pop open the case and replace the batteries that were in the case. You'll need to take out the emergency key before you replace the batteries. To do this, place the screwdriver of a small flat head into the slot that is in the middle of the. Work the screwdriver around the case until it is split open, making it easy to take it out.

If you're looking to replace your keys, keep a spare available. This will save you a lot of money. If you have spare keys, you can request that the dealer cut a new key and program it into your car, which is cheaper than replacing the whole key fob.

If you do not have a spare key you can add a second key to your car, but this requires a lot of research and effort. It can cost a few hundred bucks to add an additional car key. The computer of the car also needs to be programmed. Professionals can accomplish this however, it's a costly option.

Replacement Ignition

In contrast to the earlier Saab automobiles, the new SAAB 9-3 models feature a much more sophisticated alarm system that is built on a key code. This means that should you lose only one working key, acquiring another one can be very expensive as the car has to have a computer module fitted and must also be designed to accept a different key. Dealers can even charge hundreds of dollars to program an entirely new key, in the event that they are unable to do it.

If you've lost your sole working key the dealer will replace the computer in your car (known as the CIM or SAAB TWICE) to make the replacement, and will charge top dollar for it. We can reprogram the EEPROM of your car's computer to be ready for an extra key. This will save you more than 50% of the price you'd spend at an auto dealer.

If you've been a faithful owner of a 03-11 SAAB 9-3, then you probably realize that the ignition key isn't all that durable. If your ignition key isn't functioning properly, you must look into replacing it. They can become very sticky and the buttons have been known to fall off. It's not as difficult as it appears to replace the ignition key. With the proper tools, it can be accomplished in a matter of minutes.