7 Tips About Replacement Window Handle That Nobody Will Share With You

Choosing uPVC Replacement Window Handles

Nearly all customers agree that the upvc replacement window handles are simple to install and feel like high-quality. But it's important to understand that the type of handle you pick should be appropriate for your window.

The height of the step is the most important aspect. It is the distance between the handle and the frame, or base. Other considerations include lockable designs and mechanisms.

Replacement parts

You can buy a variety of replacement upvc handles. They come in a variety of styles and colors, so there's bound to be something that will fit your existing windows. It's easy to make an impulse purchase, especially when the handle breaks. Therefore, it is best to check a few things before purchasing a replacement. The first thing to consider is what type of upvc handle you have now and what the difference between kinds is. The table below shows the most commonly used handles to help you find the one that is suitable for your windows made of upvc.

Espag handles are the most popular and are commonly found on modern double glazed windows. They are typically attached to the frame by two screws that are screwed in from both sides.

The spindle bar in the back could be of different sizes, and can determine if they're left-handed or right-handed. It's important to take the measurements of the handle you have to ensure that you get the correct replacement.

Usually fixed with two bolts, similar to the Espag handle, they have a low projection from the frame which means that the handle will not poke through your blinds. This is a great option for those who want the handle to blend in with your blinds, and you have upvc windows.

Cockspur handles resemble Espag handles, however they have a nose which closes over a wedge that rests on the frame of the window. This type handle is found on older wooden and Upvc windows.

On casement windows, tilt and turn handles can be operated by either turning the handle or pressing on the top of the window. This allows you to open the window from inside and clean it from outside without the need to climb a ladder or step across the fence. They are also an excellent option for those with limited mobility and can be a great way to improve security and accessibility at home.

Tips and tricks

A lot of people will need to replace their uPVC window handles at some point. It is essential to know some tips and tricks to make the job easier.

The first thing you should do is determine the type of handle you have at home. Depending on what the handle is attached to and what locking mechanism it uses, it may be necessary to change the entire handle and lock. For example, if the shoot bolts (espag) and roller cams are jammed or seizing and sizing, you'll have to replace them, as well as the handle itself.

Thankfully, the majority of uPVC handles are identical and follow industry standard sizes, making replacing them a easy process. The first step is to remove the screw covers from the handles, usually using pozi-drive screws. Once the screw covers are removed, you will be able to take apart the handle.

If you've got the handle separated from the handle, it's an ideal idea to take a note of how much of the spindle extends from the base of the handle. This will help you to measure the length of the spindle to determine the replacement upvc window handles handle. Simply take note of the length the square peg extends from the bottom of the handle.

This is especially important for inline uPVC window handles as they'll always be straight and open left or right, and will not operate in the middle. It's a good idea in the event that you're not sure of the type of handle you have in your home, to borrow a handle to see how it functions.

Another great tip for working out what the hand of the uPVC window handle is is to simply look at how the handle turns when operating. Handles can be turned clockwise or counter-clockwise. If you're unsure then you can always ask someone else to open the window using the handle, and figure out how it works in that way.

Find the spindle's measurement.

It isn't easy to select the correct replacement handle for your window as not all handles come in the same size. The spindle is what is the mechanism that locks the window and it is essential to ensure that when installing the new handle that you measure the length of the spindle precisely to ensure that it will fit. There are a variety of uPVC handles that operate in different ways. It is crucial to know which type you have, and what locking mechanism you are using.

The spindle of the Espag handle is a part that extends from the rear of the handle and then into the lock gearbox within the window frame. When you turn the handle this turns the lock within the gearbox and opens the window. They are usually used on uPVC casement windows and they can be locked using keys to provide extra security.

Cockspur handles are commonly found in older double-glazed uPVC window frames. They are characterized by an "nose" that is secured by a wedge-shaped striker block. They are also simple and can be locked with keys. It is more difficult to replace these handles since they aren't as common as the espagnolette handles.

If you have a tilt and turn uPVC window then you will need to get a special kind of uPVC replacement handle that has an additional locking mechanism. It will be able to open the window by tilting it, but also rotate it around to fully open it. It is essential to make sure that the handle you pick has a spindle length at least 55mm, or it won't be able to reach into the frame of the window.

The same method can be used to remove and replace the uPVC handle. However, you'll have to be careful when removing it. You may have to open the window a bit wider than usual to ensure you access both screws that attach it to the frame. Once you have put in your new uPVC handles and checked that they are in the correct position then tighten the screw covers and test to ensure the lock is working properly.

Replace the handle with the new one.

Once you have the right replacement handle, it should be easy to screw it into the correct position. It will require a screwdriver and an electric one could be easier. It is crucial not to overtighten the screws before screwing them into. This can cause the knob or handle to become warped.

Inserting the spindle is the second important step to attach the new handle. This is the part that runs through the handle and controls the locking mechanism inside the window. It is important that the part is fitted correctly because this will permit the window to open and closed securely.

There are a variety of types of uPVC handles. There are a variety of window handles made of uPVC.

Espagnolette Handles - these are handles that are inline and can be used on windows that tilt and turn to open the window.

Cranked Espagnolette Handles - these are similar to the inline handle however they have a curvaceous design that is ideal for windows in difficult-to-access locations.

Tilt and Turn Handles These are used on tilt and turn windows for operating the closing and opening mechanisms.

These are the most commonly used and the majority of uPVC windows have them in their place. In the UK they are often called "Bay Windows".

It can be frustrating if your uPVC handle fails. There is no need to change the entire uPVC windows because of a damaged window handle. There are a few basic steps you can take to fix or replace a broken uPVC handle.

You can repair your broken window handle quickly by identifying the model and uPVC Replacement Window Handles determining the spindle. When working with windows and tools it is crucial to consider safety first. But it is a simple job. It could be the difference between having a secure and secure home or a window that is easily opened. If you have any questions or want to talk with a professional regarding replacing your window handle, call Bridgewater Glass. We have a group of experienced and knowledgeable professionals who can assist with any issues you might be having.