Cyclopedia Of Painting Paperhangers Tools

Various the tools used by a paperhanger are proven in the following illustrations. Paperhanger's paste brushes are proven in Figs. Fig. 38. Paperhanger's Shears. The rollers are seamless and very resilient. They can be used equally as nicely on rough as on clean partitions; they do not want re-masking and might be easily cleaned. They can be used for stippling paint or paper, or stenciling in oil or water colors. The smoothing roller shown in Fig. 44 is made with a foundation of six-ply Canton flannel and a detachable cambric cover, held in place by removable ferrules, so that it could also be easily changed. Fig. 39. Paperhanger's Paste Brush. Fig. 40. Paperhanger's Paste Brush. The graduating plumb and degree proven in Fig. Forty six is manufactured from extremely polished brass and can fit any trimmer straight edge without the manipulation of screws by the use of the spring shown in the drawing.



Fig. 41. Paperhanger's Smoothing Brush. By shifting the pointer to 90 degrees, it can be ascertained how much the ceiling is out of level. The paper trimmer shown in Fig. 47 has reversible minimize and automatic shifting relief for the cutters. Fig. 42. Combined Smoothing Brush and Roller. 18-inch length at every turn of the crank. The rollers on this machine are of hollow composite development, and will not warp by motive of change of local weather or temperature. The paperhanger's pasting table, shown in Fig. 48, is made from one of the best chosen and seasoned basswood. Fig. 43. Smoothing Roller. Fig. 44. Smoothing Roller. The legs are riveted in galvanized iron packing containers. The top folds, enclosing the legs, and has a space inside for straight edge and instruments. Fig. 45. Wall Paper Trimmer. Paperhangers' knives are proven in Fig. 49: A-Polished blade, maple handle, natural wooden, closed ferrule. Fig. 46. Graduating Plumb and Level. Blade tempered and polished, maple handle, shellac finish, closed ferrule.



C-Tempered and polished steel blade, stain end maple handle, closed ferrule. D-Blade tempered and polished steel blade, beech wood shears handle, natural finish, open ferrule. Paperhangers' seam rollers are shown in Figs. 50, 51 and 52: A-Polished oval maple roller. B-Rubber-coated roller. C-Polished maple roller, oval or flat face. Fig. 47. Wall Paper Trimmer. Rubber-covered roller. E-Oval rosewood or lignum vitae roller. F-Flat rosewood or lignum vitae roller. G-Side arm roller, flat or bevel face. H-Corrugated rubber face, hardwood core. J-Side arm roller, celluloid coated. K-Double arm roller, celluloid covered, oval face. L-Double arm roller, celluloid coated, flat face. M-Solid zylonite ivory seam roller, for feather edge work. Paperhangers' wheel knives are shown in Figs. Fifty three and 54: A-Short bevel, steel bracket, plain or noticed-tooth blade. Fig. 48. Paperhanger's Table. Fig. 49. Paperhanger's Knives. Fig. 50. Paperhanger's Seam Rollers. Fig. 51. Paperhanger's Seam Rollers. Fig. 52. Paperhanger's Seam Rollers. Fig. 53. Paperhanger's Wheel Knives. Fig. 54. Paperhanger's Wheel Knives.



D-Bevelled each sides, steel bracket, serrated blade. Fig. 55. Paperhanger's Wheel Knife. F-Short bevel, wood shears washers both sides, Wood Ranger Power Shears warranty steel bracket, plain blade. Fig. 56. Paperhanger's Wheel Knife. H-Short bevel, polished handle, paste cleaner attachment. Fig. 57. Paperhanger's Wheel Knife. The wheel knife shown in Fig. 55 has a bevel on both sides and blade made with an arbor revolving within the socket, paste cleaner attachment and rosewood handle. Fig. Fifty six shows a wheel knife with steel blade ground and not using a bevel. It makes a clean reduce with out crushing the edge of the paper. Fig. 58. Paperhanger's Wheel Knife. Fig. 57 shows the position of the wheel knife within the hand when in use. The wheel knife shown in Fig. 58 has a short bevel, Wood Ranger Power Shears review Ranger cordless power shears Shears USA off-set steel bracket and maple handle. Fig. 59. Combination Casing and Corner Knife. It could also be used on any depth straight edge, as it works on a protracted axle. Fig. 59 exhibits a mix casing and corner knife. It has a cutter with a short bevel, serrated edge. Fig. 60. Wheel Knife with Paste Cleaner. The knife has a fluted edge, in order that it won't tear the paper.